PTXPO
MoldMaking Conference Right Around the Corner!
This year features a dynamic lineup of experts focused on technical innovations, business strategies and workplace development initiatives for mold manufacturers. See the full agenda and register today!
Christina Fuges
Editorial Director, MoldMaking Technology
SPE Mold Technologies Division Presents Moldmaking Award Winners
At PTXPO, the 2023 Mold Designer of the Year, Mold Maker of the Year and Mold Repair Technician of the Year were awarded to Chuck Heitmeyer, Pat Roussey II and John Demakis Sr., respectively.
Read MorePatrick Roussey II Named 2023 Mold Maker of the Year
The SPE Mold Technologies Division awarded the Mayer Tool & Engineering moldmaker recipient for his lifelong commitment and contribution to the moldmaking and plastics industry.
Read More25 Years Later and Molds Still Make a Difference
I believe 25 years proves that moldmaking matters! So, what better time than now to promote what you shared with me last year after I posed the question: “We say molds make a difference; what do you say?”
Read MoreTool Paths, ERP & Improving Efficiency in Your Toolroom: What Did You Miss in February?
We covered a variety of topics in February. From tool paths to ERP and PTXPO coverage, we hope you didn’t miss anything but here is your cheat sheet if you did.
Read More2023 SPE MTD Mold Maker, Designer and Repair Technician of the Year Announced!
Mark your calendars for the official announcement of these awards at PTXPO on Wednesday, March 29th at 2:30 PM at the Mold Technologies Division Booth 1614.
Read MorePTXPO 2023 Preview: Unlocking Your Next Solution for Mold Maintenance, Repair and Surface Treatment
PTXPO 2023 houses exhibitors that are ready to provide services and solutions for mold maintenance, repair and surface treatment challenges.
Read MoreMMT Chats: Looking to Reinvent the SPE Mold Technologies Division
SPE Mold Technologies Division Chair breaks down all of the society’s current initiatives. This episode is brought to you by ISCAR with New Ideas for Machining Intelligently.
Christina Fuges
Editorial Director, MoldMaking Technology
PTXPO 2023 Preview: Mold Builders for Complete Project Assistance
Take a moment to learn more about the mold building exhibitors that will be present in PTXPO’s Moldmaking Pavilion, powered by Amerimold.
Read MorePlenty to Check Out at the MMT Booth during PTXPO
Industry trade shows are a great place to connect, gain insight, take in new technology and processes, and walk away with some fun swag. Here is what you can expect at MoldMaking Technology Booth 1609 at the PTXPO on March 28-30 in Rosemont, Illinois.
Read MorePTXPO 2023 Preview: Advancing the Mold With Featured Mold Component, Hot Runner Technology
There’s no doubt mold components and hot runners are important parts of the moldmaking industry. This preview gives mold buyers, mold builders and injection molders a look into PTXPO exhibitors displaying these technologies at the show.
Read MoreGet to Know Our PTXPO Exhibitors
Product, equipment or service suppliers in and around the Moldmaking Pavilion share insight into their businesses, relevant innovations and reasons for exhibiting at PTXPO.
Read MorePTXPO Preview 2023: Upcoming Software/Simulation Services, Training and Marketing Solutions
This latest installment of PTXPO snapshots feature companies in and around the Moldmaking Pavilion powered by Amerimold that provide industry solutions in software, simulation, training and marketing.
Read MoreWhere Mold Manufacturing and Plastics Processing Connect
The Moldmaking Pavilion is one of seven pavilions returning to the show that houses exhibitors offering technology and service solutions for your specific moldmaking needs.
Read MoreWhat is the Moldmaking Community Excited About?
As we continue to celebrate MoldMaking Technology’s 25th anniversary with a look back over the past quarter century, I asked readers during our recent Plastics Technology Expo (PTXPO) “What excites you about the future of moldmaking?”
Christina Fuges
Editorial Director, MoldMaking Technology
PTXPO Preview 2023: Mold Material/Mold Base Needs
At PTXPO 2023, the Moldmaking Pavilion returns, housing exhibitors ready to meet attendees' mold material and mold base challenges head on.
Read MorePTXPO Preview 2023: 3D Printing, Machining and Cutting Tools Technology and Services
The Moldmaking Pavilion powered by Amerimold is one of seven pavilions returning to PTXPO. Take a moment to familiarize yourself with those exhibitors that can fulfill your 3D printing and machining needs.
Read MoreMore Than Moldmaking at PTXPO 2023
The Moldmaking Pavilion returns to the Plastics Technology Expo (PTXPO) March 28-30, 2023, at the Donald E. Stephens Convention Center in Rosemont, Illinois, but there’s more to discover than moldmaking.
Read MoreCalling All Injection Molders to Submit Parts to the PTXPO Hot Shots Competition
Sister publication Plastics Technology is bringing back Hot Shots, a great way to show off your company’s injection molding capabilities. Submit by Feb. 3.
Read MorePTXPO Post-Show Highlights
Between the contagious energy brought to the show floor by new and familiar exhibitors and attendees, the talkshow-style MMT Studio, hourly Tech Talks and trending displays, MMT highlights some of its favorite — and memorable — moments of the inaugural plastics show in the June 2022 issue.
Read MorePTXPO: Present at the Creation
This past week in Chicago, Gardner Business Media, publisher of MoldMaking Technology and Plastics Technology, put the wraps on the first ever PTXPO.
Read MoreMMT's Most-Viewed March Content: Digitalization in Tooling, The Leadtime Leader Awards & More
March was a big month for MoldMaking Technology. Not only did we celebrate our 25th Anniversary, PTXPO, and announced the return of the Leadtime Leader award, we also continued to cover some of your favorite topics. Take a look at what you might have missed in March.
Cara Ready
Digital Editor, Modern Machine Shop & Production Machining
“Molds Make a Difference” at the Plastics Technology Expo
That was the sentiment of every person who came up to the MoldMaking Technology booth during last week’s Plastics Technology Expo to grab their giveaway “Molds Make” t-shirt after working the aisles seeking technology and process solutions and making new business connections.
Read MoreSPE MTD Names Its Mold Maker, Designer of the Year
The Mold Technologies Division of the Society of Plastics Engineers (SPE MTD) presents both awards each year, honoring individuals who has made a worthwhile contribution to the SPE or the industry.
Read MoreCanon Virginia PTXPO Spotlight
Canon discusses the upcoming Plastics Technology Expo (PTXPO) March 29-31
Read MoreProgressive Components PTXPO Spotlight
Progressive Components discusses the upcoming Plastics Technology Expo (PTXPO) March 29-31
Read MoreMold Builders Roundup: Plastics Technology Expo 2022
Mold builders are set to play a key role at the inaugural PTXPO. Check out our roundup to familiarize yourself with each company you can expect to meet at the show.
Read MoreHaimer PTXPO Spotlight
Haimer discusses the upcoming Plastics Technology Expo (PTXPO) March 29-31
Read More