Stainless Steel Sealing Plugs Feature High Corrosion Resistance
Reliable injection mold cooling is achieved by Hasco Z9425/.../VA seal plugs, with temperature resistance up to 180°C and up to 10-bar internal pressure.
Photo Credit: Hasco
Hasco showcases its new offerings in stainless steel sealing plugs. Particularly suited for use in cleanrooms, the Z9425/.../VA plugs enable reliable cooling of injection molding tools when using hot or cold water or heat transfer oil. The sealing plugs are temperature-resistant up to 180°C and have high corrosion resistance. Internal pressures in the cooling system of up to 10 bar (145 psi) are possible.
Assembly is simplified thanks to the Torx geometry of the fixing screw. Hasco says this design allows torque to be reliably transmitted without any damage to the inner profile. The suppliers notes that while assembly with horizontal drilled cooling holes can be done by hand, it is advisable with vertical cooling holes to slightly increase the size of the sealing plug before mounting it by screwing in the Torx screw and exploiting the friction with the wall of the drilled hole. This enables controlled positioning even with vertical installation.
Related Content
-
Revisiting Some Hot Runner Fundamentals
What exactly does a hot runner do? If you’ve been in the injection molding industry for any length of time, you might think the answer is obvious, but it is not.
-
Laser Welding Versus Micro Welding
The latest battle in finely detailed restoration/repair of mold materials.
-
How to Eliminate Chatter
Here are techniques commonly used to combat chatter and guidelines to establish a foundation for optimizing the moldmaking process.
