Videos
Multiple Set-ups Versus Turning Capabilities
Video demonstrating the Turn-Cut function available on a horizontal machining center.
WatchCylindrical Drive Technology Adds Efficiency to EDM Operations
New system only exposes half of the magnetic flux to the face of the coils.
Watch
Eliminate Chatter and Solve Finish Problems
Eliminating chatter is a great way to improve surface finish when performing CNC milling. Okuma's Machining Navi M-i detects chatter and automatically adjusts spindle speed to eliminate chatter, thus improving surface finish. This is a terrific tool for the mold/die industry.
Watch
Comparing Roughing Techniques
Side-by-side comparison of traditional roughing and our new OptiRough technique.
Watch
Advances in Video Collaboration
How manufacturers can take video collaboration outside of the office and onto the shop floor.
Watch
No-cost CAM Upgrade Gives Moldmaker Major Productivity Boosts
The latest version of Mastercam CAM software from CNC Software, Inc. contains several new features that will greatly improve productivity, especially roughing and fine finishing.
Watch
CT scanning: A Differentiating Factor
NyproMold finds its growth in differentiation—including using CT scanning to look through parts with an accuracy of 5 to 7 microns, obtaining information that can speed the mold manufacturing process.
Watch
Linear Drives Increase Speed, Accuracy
Two distinctive capabilities on the new machines each have a great impact on DTE's time to market— linear drives and five axis.
Watch
Linear Five-Axis at Die Tech & Engineering
Video about using linear motor 5-axis machines at Die Tech & Engineering in Wyoming Michigan near Grand Rapids. Simultaneous five axis contour milling of hardened tool steel.
WatchVideo: CT Scanning for Mold Inspection
Moldmaker NyproMold describes its experience using computed tomography (CT) scanning to validate precise injection molds.
WatchMicro Inspection at Matrix Tooling
Various inspection and measurement resources help a moldmaker produce tooling for tiny molded parts.
Watch
Getting the Most out of Your Standard Spindle
High spindle speed is not needed for high productivity. Techniques described in this tutorial video relate to plunge roughing, high feed milling and slotting.
Watch
