MMT Blog

How Additive Manufacturing Can Help, Not Hinder, Injection Moldability of New Designs

Four cost drivers — design for moldability, mold base size, internal componentry and polish/custom finishing — dictate the financial and processing success of a molded part design. Learn how 3D printing can assist this process, while also understanding potential pitfalls.

MMT Chats: California Mold Builder Discusses the Difficulties with Silicone Molding and the Power of the Magic 8 Ball

MoldMaking Technology Editorial Director Christina Fuges sits down with M.R. Mold President and Owner, Rick Finnie, to discuss how he began his moldmaking career, M.R. Mold's LSR Education, and the struggles of working with silicone. This episode is brought to you by ISCAR with New Ideas for Machining Intelligently. 

Surface Finish: Understanding Mold Surface Lingo

The correlation between the units of measure used to define mold surfaces is a commonly raised question. This article will lay these units of measure side by side in a conversion format so that companies can confidently understand with what they are dealing.

Mold Builder Uses Counter-Intuitive Approach for Mold Challenges

Matrix Tool Inc. answers customers’ hard questions with creative solutions for cavity spacing, tool sizing, runner layout and melt delivery that reveal the benefits of running in a smaller press size at lower cavitation but higher yield.

How to Eliminate Streaks and Weld Problems with Laser Technology

Laser technology overcomes streaking and welding challenges for new mold textures and texture repair.

MMT Chats: American Mold Builders Association on Best Practices for Employee Attraction and Hiring

MoldMaking Technology Editorial Director Christina Fuges sits down with AMBA’s Managing Director Kym Conis and the Director of Strategic Execution Rachael Pfenninger to discuss its Employee Attraction and Hiring Playbook and the Workforce Development Task Force. This episode is brought to you by ISCAR with New Ideas for Machining Intelligently. 

Poll: Which Shop Impressed You the Most in 2022?

From Human Resources to a Moldmaker Card Game: The Most-Viewed MMT Chats of 2022

The MMT team has compiled a list of the most-viewed MMT Chats of 2022 based on analytics. From human resources’ role in the moldmaking industry, to a moldmaker playing card game, MMT Editorial Director Christina Fuges has covered a lot of topics with her guests. Check out the list to see what you may have missed or revisit an old favorite. 

Multi-cavity Hot Runner Design Takes on Bio-based Material Challenges

Mold builder teams up with a hot runner supplier to develop a system configuration that produces an eco-friendly, attractive single-serving capsule.

Advances in P20 Steel Potentially Eliminates Need for Stress Relieving After Rough Cutting

Omega Tool Corp. compares conventional, new P20 grades side by side in production fascia tools, finds no downside.

How to Machine Micron-Level Precision Molds in One Try

On-machine measurement intelligence and modification technology helps mold builders overcome machining variables and quickly produce micron-level tolerances.

Components Drive Downturned Activity in Moldmaking GBI

Gardner Intelligence reports a steady contractionary period for the November Gardner Business Index (GBI) Moldmaking.