Leadership
Cimatron Appoints Taline Forsberg as New President
Taline Forsberg has been appointed as president of Cimatron within Sandvik Manufacturing Solutions as of November 1st, 2024.
Fiona Lawler
Associate Editor, MoldMaking Technology
MMT Chats: Eliminating the Noise to Stay Focused on the Customer
Metro Mold & Design joins me to discuss the value of the 80/20 rule as a business strategy, its talented cross-functional team, the role of automation in mold building and molding, and the continuing impact of COVID-19.
Read MoreMMT Chats: The Connection Between Additive Manufacturing Education and ROI
This MMT Chat continues the conversation with Action Mold and Machining, as two members of the Additive Manufacturing team dig a little deeper into AM education, AM’s return on investment and the facility and equipment requirements to implement AM properly.
Read MoreHow to Use Scientific Maintenance for More Accurate Mold and Part Troubleshooting
Discover how adopting scientific maintenance approaches helps improve mold lifespan, minimize failures, and optimize production outcomes.
Read MoreConfronting the Mold Design Talent Drought
Recently, I reposted on LinkedIn the results of an informal survey we conducted, which revealed a shortage of skilled mold designers. It quickly gained a lot of traction. Given the response, I thought I'd summarize the feedback and keep the conversation going.
Read MoreWhat is Scientific Maintenance? Part 2
Part two of this three-part series explains specific data that toolrooms must collect, analyze and use to truly advance to a scientific maintenance culture where you can measure real data and drive decisions.
Read MoreMMT Chats: 5 in 5 with Best Tool and Engineering
MoldMaking Technology Editorial Director Christina Fuges reveals 5 best practices for improving efficiencies within shops...in 5 minutes. Our guest is Joe Cherluck, President of Best Tool and Engineering in Clinton Township, Michigan.
Read More
VIDEO: Community, Technology and the Future of Moldmaking: Notes from IMTS
A discussion with AMT’s Bill Herman during ShopTalk on the big stage at IMTS 2024 highlights moldmaking's unique blend of craft and technology that is driving innovation while its community tackles key challenges.
Christina Fuges
Editorial Director, MoldMaking Technology
Innovation, Diversification and Integration Guide Mold Builder Growth
Quality Tool and Die team discusses the journey from a small automotive tool shop to a diversified full-service moldmaking and plastic production facility.
Read MoreMaking Mentoring Work | MMT Chat Part 2
Three of the TK Mold and Engineering team in Romeo, Michigan join me for Part 2 of this MMT Chat on mentorship by sharing how the AMBA’s Meet a Mentor Program works, lessons learned (and applied) and the way your shop can join this effort.
Read MoreHow to Empower Your Team with Leadership and Mentoring
What follows is a Q&A with James Jergens, an MMT EAB member and Owner of Ascend Innovative Mold.
Read MoreMMT Chats: 5 in 5 with Roembke Mfg & Design
Editorial Director Christina Fuges chats with Adam Shaal, Business Development Manager for Roembke Mfg & Design to reveal their five best practices for improving efficiencies in culture, technology, process, measuring success and staying competitive.
Read MoreMMT Chats: 5 in 5 with Neu Dynamics
MoldMaking Technology editorial director Christina Fuges chats with Kevin Hartsoe, president of Neu Dynamics to reveal their five best practices for improving efficiencies in culture, technology, process, measuring success and staying competitive ... in 5 minutes.
Read MoreHow to Solve Hot Runner Challenges When Molding with Bioresins
A review of the considerations and adaptations required to design hot runners and implement highly productive injection molding operations.
Read More
Upgraded Damping Mechanism Enables Performance Consistency
Sandvik Coromant Company has upgraded the damping mechanism for its turning adaptors for a more consistent performance and improved surface finish during internal turning operations at long overhangs.
AMBA Welcomes New Member to its Team
The AMBA announces the addition of Anne Cobb as the West Michigan AMBA chapter coordinator.
Read MoreMilltronics Expands Leadership Team to Drive Growth, Innovation
Milltronics USA Inc. announces the strategic expansion of its leadership team with the addition of four industry veterans: Ryan Delahanty, Don Hammer, Brian Starnes and Steve Schermann.
Read MoreDynamic Tool Corporation – Creating the Team to Move Moldmaking Into the Future
For 40+ years, Dynamic Tool Corp. has offered precision tooling, emphasizing education, mentoring and innovation. The company is committed to excellence, integrity, safety and customer service, as well as inspiring growth and quality in manufacturing.
Read MoreMMT Chats: ‘Block and Tackle’ to Build Future Leaders
MoldMaking Technology Editorial Director Christina Fuges catches up with Editorial Advisory Board member James Jergens to discuss mentorship, leadership, troubleshooting and technology.
Read More3 Es of Small, Family-Owned Mold Shop
Isaac Trevino, Business Development Manager, with Best Tool & Engineering is a mechanical engineer and entrepreneur at heart. In this interview, he talks about working in the business of moldmaking, evaluating ERP solutions, making partnerships to train the next generation and managing expectations.
Read More2024 AMBA Conference Taught Me How to Elevate, Engage and Evolve
I returned home with a wealth of inspiration and instructions, including the importance of leaning into discomfort, having difficult discussions, delegating more, letting others shine and understanding the difference between a promise and a goal.
Read More
MMT Chats: Mentoring Future Engineering Talent by Bridging Education and Practical Work
Editorial Director Christina Fuges uncovers firsthand experiences of fostering curiosity and continuous learning at Accede Mold and Tool.
Christina Fuges
Editorial Director, MoldMaking Technology
Questions and Considerations Before Sending Your Mold Out for Service
Communication is essential for proper polishing, hot runner manifold cleaning, mold repair, laser engraving and laser welding services.
Read MoreHands-on Workshop Teaches Mold Maintenance Process
Intensive workshop teaches the process of mold maintenance to help put an end to the firefighting culture of many toolrooms.
Read MoreThe Role of Social Media in Manufacturing
Charles Daniels CFO of Wepco Plastics shares insights on the role of social media in manufacturing, how to improve the “business” side of a small mold shop and continually developing culture.
Read MoreManaging all That Data
Product data management may have a bad rap, but making it a priority rather than an afterthought can help make the most of your design and machining information.
Read MoreMoldmaking is a Relentless Pursuit of Innovation
Innovation is at the root of mold manufacturing, which includes technology and strategies for mold design, automation, collaboration, communication, talent development, reshoring and sustainability.
Read MoreCombining Innovation and Artistry to Build Complex, Precision, Multi-Cavity Molds
This Florida mold builder is about high-performance, high-precision moldmaking by blending craftsmanship with technology.
Read More
