Flowmeter Enables Accurate Water Volume Measurement, Regulation
Hasco’s flowmeter, which can be installed anywhere in the direction of flow, aids moldmakers in rapid and easy flow rate readings on injection molds.
Photo Credit: Hasco America
Hasco America introduces its new flowmeter Z9905, enabling accurate measurement and regulation of the required volumes of water in cooling systems. This is ideal for moldmakers where, in the course of production, it is frequently necessary for the flow rate of the cooling medium on the injection mold to be read off rapidly and easily so that it can be regulated locally if necessary.
The volume flow on Hasco’s flowmeter can be read off directly and easily in l/min at the bottom edge of the float and can be regulated with equal precision and speed using a screwdriver. If necessary, the flow can be shut off completely. The flowmeter can be installed anywhere in the direction of flow.
It can be used at temperatures of up to 100°C and operating pressures of up to 10 bar and is said to be suitable for both water and water/glycol mixtures.
Related Content
-
Revisiting Some Hot Runner Fundamentals
What exactly does a hot runner do? If you’ve been in the injection molding industry for any length of time, you might think the answer is obvious, but it is not.
-
Advantages and Disadvantages of Copper and Graphite Electrodes
Both copper and graphite provide approximately the same end result, so it is important for a shop to consider the advantages and disadvantages of each material in order to discover what would work best in their shop floor environment.
-
Hands-on Workshop Teaches Mold Maintenance Process
Intensive workshop teaches the process of mold maintenance to help put an end to the firefighting culture of many toolrooms.
