2020 Sourcing & Technology Guide: Mold Components
MoldMaking Technology’s annual Technology Review and Sourcing Guide is a comprehensive guide for researching today’s technology, equipment, products and services with 11 sections, including Mold Components.
Image courtesy of PCS Co.
MoldMaking Technology’s online database offers more than 1,000 manufacturers, distributors and suppliers for more than 200 product and service categories that you employ daily. To keep this information current, MMT surveys and updates its supplier database every spring with the latest company contact information and product/service offerings, including Mold Components.
This month’s Technology Review and Sourcing Guide includes a portion of that database listed in sourcing grids tailored to match suppliers with their respective product/service offerings along with a sample of product releases that the magazine featured throughout the year. These are the 40 companies from the July 2020 [CATEGORY] section:
Agathon Machine Tools Inc. — Bethel, CT, 203-730-8741
Alba Enterprises Inc. — Torrence, CA, 909-941-0600
Better Molding Solutions — Ellington, CT, 860-454-8656
BMS Burns — Medina, OH, 800-345-7693
Choice Mold Components Inc. — Clinton Twp., MI, 586-783-5600
Crafts Technology — Elk Grove Village, IL, 847-758-3100
Craftsman Tool & Mold Co. — Aurora, IL, 630-851-8700
Cross Tool & Manufacturing Inc. — Flagstaff, AZ, 928-779-4218
Cumsa USA — Troy, MI, 248-850-8385
Dalton Electric Heating Co. Inc. — Ipswich, MA, 978-356-9844
DME Company — Madison Heights, MI, 248-398-6000
DMS — Oldcastle, ON, 519-737-6743
Edro Engineering and Specialty Steels Inc. — Walnut, CA, 909-594-5751
eMoldino — Seoul, KR, 82 70 7678 6388
Ermanno Balzi Srl — Mazzano, BS, Italy, +39-030-212-0868
Hasco America Inc. — Fletcher, NC, 828-650-2600
Hawk Mold & Die Supply Inc. — Pipersville, PA, 800-488-7757
Hotset America Corp. — Swainsboro, GA, 912-289-1844
i-mold GmbH & Co. KG — Erbach, Germany, +49 6062 8093 30
IMS Co: Industrial Molding Supplies — Chagrin Falls, OH, 440-543-1615
Ipsco International — Attleboro, MA, 508-226-1776
Mac-Mold Base Inc. — Romeo, MI, 586-752-1956
Meusburger US, Standard Molds — Charlotte, NC, 704-526-0330
Misumi USA Inc. — Schaumburg, IL, 847-843-9105
Mold Base Industries Inc. — Harrisburg, PA, 717-564-7960
Molder’s Choice Inc. — Solon, OH, 800-809-4623
National Tool & Manufacturing — Wheeling, IL, 847-806-9800
Nonnenmann Inc. — Sterling Heights, MI, 586-977-8190
OMNI Mold Systems — Lisbon, CT, 888-666-4755
PCS Co. — Fraser, MI, 586-294-7780
PFA Inc. — Germantown, WI, 262-250-4410
Precision Ground Inc. — Lakemoor, IL, 815-578-2613
Precision Punch Corp. — Berlin, CT, 860-229-9902
Priamus System Technologies LLC — Sterling, VA, 877-774-2687
Progressive Components — Wauconda, IL, 847-487-1000
Roehr Tool Corp. — Hudson, MA, 978-562-4488
SelfLube — Coopersville, MI, 616-837-9721
Smith Enterprises — Wood Dale, IL, 630-595-0202
Superior Die Set Corp. — Oak Creek, WI, 414-764-4900
Unitherm Insulation Systems — Lewisville, TX, 972-436-1401
MOLD COMPONENTS PRODUCTS
Hasco introduces identification stamps, which offer simple solutions for clear and direct identification of plastic injection molded parts.
Meusburger offers sensors for cavity pressure measurement, which includes two types for direct and indirect measurement.
Progressive Components announces the release of its insulator block, which installs on the outside of the mold and is used to protect the company’s CounterView and CVe monitor from temperatures when molding high-temperature resins.
Cumsa showcases its Double Date Stamp Ø16 Blank.
DMS adds Almo’s cutting sprue bushing to its range of edge gate cutting components.
PFA, Inc. announces the release of the 70 series “mini” hydraulic preloading and locking cylinder as part of the Kor-Lok side-action system product line.
Michmar Engineering announces the EZ Slider, which eliminates the need for traditional slide and lifter components.
Solid bronze guided ejector bushings from PCS Company offer superior performance for toughness, tensile strength and low coefficient of friction.
For More Information on Mold Components
Image courtesy of Cumsa.
Browse our entire database of moldmaking suppliers in the supplier section. You can search by company name or by product category name, including automation, CAD/CAM, cutting tools and toolholders, EDM, hot runner systems, inspection/measurement, machining centers, mold components, mold maintenance, repair and surface treatment, mold materials, molds/tools/dies and additive manufacturing.
Interested in more of the latest content on Mold Components from MoldMaking Technology? Be sure to check out the Mold Components Zone for the latest articles, blogs, products, news and videos.
Related Content
-
Fundamentals of Designing the Optimal Cooling System
The right mold components can help improve mold cooling and thereby produce higher-quality parts.
-
How to Eliminate Chatter
Here are techniques commonly used to combat chatter and guidelines to establish a foundation for optimizing the moldmaking process.
-
Advantages and Disadvantages of Copper and Graphite Electrodes
Both copper and graphite provide approximately the same end result, so it is important for a shop to consider the advantages and disadvantages of each material in order to discover what would work best in their shop floor environment.
