How to Advance Molding Undercuts with Collapsible Core Design
A new flush-style collapsible core design might help to overcome objections to using the technology and advance the molding of undercuts.
Collapsible cores have long been touted as a viable alternative for molding undercut details like internal threads as opposed to using traditional unscrewing mechanisms like racks and gears. Several potential benefits result from using collapsible cores, not the least of which is eliminating the messy unscrewing cores, and yet it can be difficult convincing a moldmaker or a molder to use the technology. A new flush-style core design just might help to overcome objections and advance the molding of undercuts.
Here are seven good reasons to consider this new technology:
- Durability. The most common objection is that the cores do not have the durability to last three million cycles. In some cases, this might be true, but the patented flush-style core has succeeded in attaining eight to 10 million cycles. For example, flush-style cores were used for a 24-cavity tool molding a wine cap measuring 30 millimeters by 40 millimeters. The cap’s wall thickness reduces to 0.25 millimeters for the tear-off strip. There are pin shut-offs on both sides of the core, and the slides shut off on the core, which shapes the bottom of the cap. The mold ran for eight years and averaged between one million and 5 million cycles per year.
- Radius positioning. This project was successful because unlike other styles of collapsible cores, the radius on a flush-style core (located on its pin) is positioned internally versus at the core’s tip. This is so that the pin’s top surface is flush with the core’s top, enabling the part to be designed with a consistent wall thickness.
- Ring design. Also unique is that the inner and outer fingers of the flush-style cores are positioned on two separate rings versus one. Wire EDM improves the fit between the fingers, and all the fingers open independently so that the sides of the fingers do not wear.
- Core assembly. The core assembly uses straight, true diameters, further improving the fit and core durability and accuracy. These true diameters act like a pin and bushing with almost no wear.
- Core fit. Working without tapered-fit surfaces makes it easier to fit the core into the mold. A straight pin ensures that the core is open to the proper molding position, so the molded part shows only a witness line and no flash. This new fit also improves thermal transfer by fitting a true diameter.
- Cost and cycle time. A collapsible core design can help mold parts with undercut details at one-third the cost of an unscrewing mold and half the cycle time. It is no longer necessary to design in a rack mechanism because there is no need for it because of the cost reduction coupled with a simpler mold design. The notably faster cycle time is achieved because there is no unscrewing of the part.
- Footprint. A final point to consider is that collapsible cores have very small footprints, which means that the designer can position more parts in the same size mold or the same number of parts in a smaller mold using a smaller press. When compared to an unscrewing mold, the difference is dramatic, as cavitation can be increased by a third or even half again as much in the same size mold.
About the Contributor
Garry Zydron
Garry Zydron is the president of Collapsible Core Inc.
Related Content
It Starts With the Part: A Plastic Part Checklist Ensures Good Mold Design
All successful mold build projects start with examining the part to be molded to ensure it is moldable and will meet the customers' production objectives.
Read MoreMaintaining a Wire EDM Machine
To achieve the ultimate capability and level of productivity from your wire EDM on a consistent, repeatable and reliable basis, regular maintenance is a required task.
Read More6 Ways to Optimize High-Feed Milling
High-feed milling can significantly outweigh potential reliability challenges. Consider these six strategies in order to make high-feed milling successful for your business.
Read MoreAdvantages and Disadvantages of Copper and Graphite Electrodes
Both copper and graphite provide approximately the same end result, so it is important for a shop to consider the advantages and disadvantages of each material in order to discover what would work best in their shop floor environment.
Read MoreRead Next
Top 10 Game-Changing Technologies
As part of our 20-year anniversary, readers share their top most impactful technologies since 1998.
Read MoreHow to Use Continuing Education to Remain Competitive in Moldmaking
Continued training helps moldmakers make tooling decisions and properly use the latest cutting tool to efficiently machine high-quality molds.
Read MoreHow to Use Strategic Planning Tools, Data to Manage the Human Side of Business
Q&A with Marion Wells, MMT EAB member and founder of Human Asset Management.
Read More