Moldmaking Technology Magazine
Published

Top 10 Ways You May Be Selling Your Customers Short!

Don’t fall into bad habits—put your customers first.

Share

Joseph and JoAnn Callaway, founders of the real estate company Those Callaways, have also written a book together: Clients First: The Two Word Miracle. Here is their Top 10 List of ways they prioritize their customers’ needs.

1. You believe your number-one business goal is to make money. Ummm…isn’t that the point of running a company? you might be asking. Well, it’s a point, says Callaway, but it’s not the point. A too-acute focus on improving the bottom line takes your attention off of the people who are going to enable you to raise it: your customers. Your clients can always tell when they’re not your first priority. (If you’re skeptical, just consider the backlash that often occurs when small businesses are bought out and transformed by larger, more impersonal corporations.)

“The difference between paying attention to service so that your clients will give you more business and doing so because serving the customer is your first priority may feel slight, but it’s significant,” Callaway promises. “Taking your focus off the bottom line may feel uncomfortable at first. But you’ll soon find that when you focus on how best to serve clients, tough decisions make themselves. If it serves the client, you do it. If it doesn’t, you don’t—even if you make less money. This neutralizes moral dilemmas and really simplifies your life. And it can have a miracle effect on your growth and success.”

2. You let the little things slide. As a business owner, there are a lot of “big” things you’d never neglect. For example, you wouldn’t lock up for the night without making sure that your restaurant’s kitchen was thoroughly cleaned, and you wouldn’t allow your accountancy office’s college intern to prepare a client’s taxes. However, you might not be such a stickler for what you believe are “smaller things.” Rushing through paperwork so you can get home early, failing to spellcheck an email or two, and running late to a meeting probably won’t matter that much six months from now, you think. But that’s not necessarily the case, says Callaway.

“So often in life, it’s the small details that differentiate ‘good’ from ‘great,’” he says. “And make no mistake: If it impacts a customer’s happiness, best interests, comfort level, or anything else even the slightest bit, it’s not a ‘little’ thing. When you fail to get the small details right, you fail to truly put customers first. On the other hand, promises kept, deadlines met, little extra flourishes, and small acts of kindness add up to happy clients.

“One thing Those Callaways does with clients in escrow is to call or email them every day, even if nothing is happening,” he adds. “This simple message of ‘nothing happening, wanted you to know’ is a huge stress reliever and an even bigger business builder.”

3. If it’s not “broke,” you don’t fix it. Many business owners subscribe to the theory that if something’s not broken, they don’t need to fix it. If the check-in paperwork your receptionist uses has been in place for years and you’re not getting many complaints, why tinker with it? If your knowledge is sufficient to handle most of your clients’ problems, why spend valuable time learning more? According to Callaway, the answer is simple: If you don’t consistently strive to improve, you’re not putting your clients first.

“I’m not saying you need to spend every minute of your spare time attending conferences, taking classes and webinars, and reading industry journals,” he clarifies. “However, you should make it a priority to stay familiar with the way your industry is growing and changing. You should also do everything possible to offer your customers the quality and value they deserve. Always question the status quo, and ask yourself how you can make it better. You don’t just want your customers to be satisfied; you want them to be pleasantly surprised every time they do business with you.”

4. You downplay your mistakes. Nobody likes the mishmash of negative feelings that accompanies making a mistake. That’s why many business owners (and their employees) resolve matters with clients as quickly as possible when a ball is dropped, and then try to never speak of the matter again. After all, there’s no sense wallowing in your slip-up—you need to move forward! Right?

“Wrong,” states Callaway. “When your company makes a mistake, no matter how big or small, it’s your responsibility to stare that mistake in the face and get to the very bottom of what went wrong. That’s not just so you can fix one particular error; it’s so you can figure out why it happened and make sure it doesn’t occur again.

“Every mistake is a good learning opportunity,” he adds. “Maybe you’ll figure out that you need to improve a quality-control procedure, for example, or perhaps a client’s complaint about mail being sent to her former address will spur you to update your record-keeping systems. My point is, when you sweep a mistake under the rug instead of allowing it to make you better, you aren’t putting your clients’ future interests first.”

5. You subscribe to the idea that the customer is always right. Callaway isn’t saying that you should disregard a client’s preferences and desires—of course you should try to get to the bottom of what each customer wants, and then do whatever is in your power to deliver that product or service. However, when customers are simply wrong and their best interests are at stake, it’s your responsibility to say so.

“Allowing a customer to be ‘right’ when you know he isn’t may pacify him temporarily, but in the end, it won’t be good for either of you,” Callaway says. “Putting clients first sometimes means politely but honestly disagreeing with or disappointing them. If a financial advisor allows a client to make an overly risky investment he’s determined to make, it doesn’t make the client right; it just makes the advisor irresponsible.

“JoAnn and I had our Clients First revelation while wrestling with whether or not to allow a customer to be ‘right,’” he adds. “Should we allow a family to buy a home they wanted, but that would have stretched the buyer’s finances and caused the seller to accept less than they should? We could have kept our mouths shut, but we decided to tell both parties that the transaction was a mistake. Ultimately, we were able to find a better option for both parties because we put their best interests above profits, pride, or convenience.”

6. You habitually let certain clients go to voicemail. It’s happened to everyone: When you see that name flash on your phone’s caller ID, you slowly pull your hand back from the receiver and let the ringing continue. You just don’t want to deal with the drama, or the whining, or the accusations, or the belligerence just now. Yes, we all have “problem” clients. But to avoid them or just go through the motions for them is a mistake. They will notice and remember your behavior. (And be honest: Would you want to give your business to someone who might write you off when the going got tough?)

Clients First means all clients,” Callaway insists. “In over fourteen years, my wife and I have never gotten rid of a single client—even when we secretly wished we could—and we believe this no-fire strategy has contributed significantly to our ultimate success. Here’s the payoff: When you make the choice to stand by all of your frazzled, frustrated customers, you will eventually reap financial and personal rewards.

“You may even become known in your company or industry as the guy or gal who can handle the toughest customers,” he adds. “And chances are, your clients themselves will be grateful that you didn’t give up on them and may even send others your way.”

7. You find yourself telling white lies. Telling clients white lies, or exaggerating, misdirecting, or omitting, might make life easier temporarily. It’s easy to justify such behavior (She’ll never know, and it’ll save me hours of work, for example). But Callaway says these “little” lies are as bad as the whoppers. There is always a chance that customers will see through you and call you on the carpet. Even if they don’t, a willingness to play fast and loose with the truth suggests a broader attitude that relegates clients to second or third priority. (In return, that’s usually how they’ll rate you.)

“Honesty can be tough in the moment, but a reputation for trustworthiness—or untrustworthiness!—can stick with you for life,” says Callaway. “Live by a policy of never holding back or sugarcoating and you’ll gain loyalty that money can’t buy. Plus, when you have only the truth, you don’t have to worry about getting the story straight or remembering what you have and haven’t shared. You know you’re doing the right thing.”

8. You spend more time trying to get off the phone than really hearing what the customer has to say. Chances are, you roll out the red carpet in order to get prospective clients on board. And you’re probably willing to bear with the whims, questions, and requests of fairly new customers whose business isn’t yet cemented. But what about older, more established clients? Do you take the same amount of time and care with them, or do you assume they’ll stick with you out of habit and convenience?

“If you wouldn’t hang up the phone at the first opportunity with a client you signed last week, don’t do it with one you signed ten years ago,” advises Callaway. “Companies that become number one don’t do so because they win customers over once, but because they do it every day. A good experience last month usually won’t keep a customer coming back this month if he or she believes that your level of service has slipped.”

9. You don’t know your client’s daughter’s name or what he likes to do on the weekends. In your eyes you’re being professional when every question in your meeting is about the client’s financial preferences, for example, and not his family, pastimes, and interests. But in his eyes, you’re cold and impersonal. Remember, to truly serve, you have to care. When you keep yourself at arm’s length, you can’t give your clients 100 percent…and you give them an incentive to take their business elsewhere.

“Do you see your clients as sources of income, or do you see them as actual human beings with likes, preferences, quirks, and stories?” Callaway asks. “People want to do business with individuals they like—and they like people who like them! Make a deeper connection with your clients by asking about their kids, their pets, their hobbies, and their jobs or businesses. You’ll find that most of them are just like you: filled with worries, hopes, and dreams. Once you get familiar with and invested in these things, you’ll work that much harder on each client’s behalf, and you’ll earn their loyalty in the process.”

10. You feel your main obligation to employees is writing their paycheck. While (of course) you don’t treat employees like dirt, you may feel that you don’t owe them any special favors, either. After all, you’re paying them—isn’t that enough? Well, no, says Callaway. The way your people treat customers reflects the way you treat them. Are you courteous? Kind? Enthusiastic? Do you listen when they talk to you and try to accommodate their needs? Or are you short, perfunctory, and even (sometimes) rude?

“Your job is to serve others, period,” Callaway says. “You can’t do that by making distinctions between the people who work for you and the people to whom you provide a good or service. Realize that you set the tone for your company’s ‘personality,’ and that you’re creating a tribe of people who will beat the drum for your message. Try to see your employees through a client’s eyes and be honest: Would they win first or second place in a customer service competition? If you don’t like the answer, try adjusting your own attitude first.”

KM CNC Machine Service
Techspex
North America’s Premier Molding and Moldmaking Event
MoldMaking Technology Magazine
Progressive Components
Bonal Meta-Lax Stress Relief Solution
Date Code Inserts
Data Flute
MMT Today enews
Bonal Meta-Lax Stress Relief Solution
Data Flute
North America’s Premier Molding and Moldmaking Event
Techspex
MMT Today enews
KM CNC Machine Service
Date Code Inserts

Read Next

Tips

Reasons to Use Fiber Lasers for Mold Cleaning

Fiber lasers offer a simplicity, speed, control and portability, minimizing mold cleaning risks.

Read More
3D Printing

Are You a Moldmaker Considering 3D Printing? Consider the 3D Printing Workshop at NPE2024

Presentations will cover 3D printing for mold tooling, material innovation, product development, bridge production and full-scale, high-volume additive manufacturing. 

Read More
Data Flute